Accessories

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

Lezyne's Ex Caddy is an expandable wedge shaped caddy with a lower portion that unzips when more storage is needed. Labeled internal organizational pockets provide extra organization. A buckle system securely attaches the Caddy to the seatpost and seat rails. Durable woven nylon fabrics, water resistant zippers, reflective logos, and reflective tail light loop make this caddy ready for all weather and nighttime riding.

You'll have a whole lotta love for this CO2 inflator on long rides. It fits Presta and Schrader valves and weighs next to nothing. The cartridge is insulated with a sleeve to prevent frozen fingers and the small size means the Red Zeppelin fits easily in bags, pockets and packs. Two 16-gram cartridges are included. Now you'll never be stuck like a "Fool in the Rain."

Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.

Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.

SKS's S-Blade rear fender attaches easily to almost any road bike seatpost, protecting you from road spray and letting you ride through the wet.

Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

A convenient all-in-one pack containing useful tire-change essentials. Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires. Product details - Kit features everything you need to quickly fix a flat, including the seat pack - Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage - Contents include: mini pump, three tire levers, and patch kit - Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

The perfect way to say 'Hello' Or 'hey there,' 'coming through' and 'sup.' We've made ringing an art form. Spice up your handlebars with our unique graphics and bold colors. Let people know you’re coming through. And do it in style. - Easy-to-push lever creates a friendly ringing sound - Includes attachment hardware

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers. - Rear fender expands for custom fit - Rubber fasteners mount to a variety of frame styles

The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA. - For bikes with a factory mounting plate (includes bolt) - 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface

An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

We know you love the 133, 3133, and 157 baskets. But what happens when you want to haul something that isn't overly large, but can really weigh you down? We thought you'd probably bust out a welding torch and tack a couple of legs on the 133 basket. So that's exactly what we did. The 135 is the exact same size as our popular 133 and 3133 baskets with shorter handlebar mounts and legs bolted to the bottom of the basket. Perfect for a couple of two liters, or a six-pack with some chips and salsa to go. - Basket dimensions: 14.5 X 9.5 X 9 inches - Legs match the finish of the basket - Same size as the popular 133 and 3133 baskets with shorter handlebar mounts

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

White Lightning's Epic Ride lets you take on that all day ride and hear only the birds chirping, not your chain squealing. Its unique formula features premium non-petroleum synthetics that provide unheard of durability without the grimey build-up common with synthetic oils. This versatile lube also works wonders on derailleur cables and suspension seals. And, good news for the forgetful amongst us, Epic Ride is lube-and-go, no prep or dry time required!

Kryptonite's New York Fahgettaboudit is a 14mm, six-sided link chain made of triple heat-treated, boron manganese steel giving it extreme strength. The chain is covered with a durable nylon covering that protects your bike against scratches. This 3.25-foot chain secures with Kryptonite's New York Disc Lock that boasts a 15mm steel shackle for serious security. Plus, three keys are included, with one that has a high intensity LED bulb for convenient, easy unlocking in the dark. This New York Chain has an anti-theft protection offer.

Lezyne's easy-to-use Alloy Drive CO2 is super compact and portable. Its simple twist operation lets you control exactly how much CO2 you're putting into your tires. Plus, its aluminum construction is lightweight, durable and easy on the eyes. What's more, the Alloy Drive is Presta/Schrader compatible, comes with an anti-freeze sleeve, and works with 16g threaded cartridges. - CNC machined aluminum dispenser with brass internals - CNC control knob twists for easy and controlled inflation - Twin Slip Chuck head presses on to Presta and Schrader valves - Neoprene sleeve insulates hand from cold during discharge - Compatible with threaded CO2 cartridges - Comes with one 16g cartridge

Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

The Klic Floor Pump effortlessly adapts to your needs with a magnetic quick-connect interface. The hidden hose with integrated gauge stores neatly away in the pump body when not in use, and can be used separately as a standalone tire pressure gauge. The optional burst tank installs or removes in seconds, and can be used either separately or integrated for installing and inflating tubeless tires with ease. - Burst tank can be pressurized to install and inflate tubeless tires - Tank is removable for easy transport - Hidden hose stores neatly in the body of the pump

The Takeout Basket conveniently carries a six-pack, five burritos, eight chinchillas, or extra layers. - Features integrated U-lock carrying slot - Side eyelet for mounting a front light - Fits 25.4 – 31.8mm handlebars - Load Limit: 12lbs

These two black plates fit nice and snug between the chainstays of the newly redesigned Disc Trucker (2020 and newer), allowing you to bolt on the kickstand of your choice without gravely injuring your frame. Our other silver-colored Kickstand Plates remain the best option for legacy Trucker frames, so please don’t use the old plates with the new bike or the new plates with the old bikes. Normally we don’t like to tell people how to use our stuff, but in this case we have to take… a stand. - Allows use of any kickstand while protecting chainstays from damage - Includes two plates to protect the top and bottom of the chainstays - Compatible with 2020 and newer Disc Trucker frames

A sturdy steel rack which allows for mounting Thule Yepp Maxi Easyfit and Thule Yepp Nexxt Child Bike seats. Features - Compatible with most 28"/700c city and hybrid wheeled bikes - Supports up to 35Kg/77 lbs

- The Pro Seat is the ultimate child seat for MTB families. It’s lightning fast to attach and remove, is fully adjustable, and has zero frame contact. - Designed for children 2 – 5 years (up to 60lb / 27kg) - Super fast to fit, remove and swap between bikes - Fully adjustable with zero frame contact - Adjustable to fit electric and regular mountain bikes - Shotgun Pro bars are quick release for lightning-fast fitting and removal - Shotgun Pro Bars have pro 19mm grips, are 355mm wide, and are compatible with 31.8 and 35mm bars - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

Lights, camera, Electra. Light up your life and your bike. Increase safety while riding by strapping these lights to your bike. Brighten up your bike and guide your ride. - Easily attached and removed with rubber strap - Low power indication - Waterproof design - USB chargeable - Weight: 20g