- Replacement stabilizers set for Bike Travel Bag Pro
The EVOC FRAME PAD protects the bike frame from scratches and other transport damage. - Fits most bike frames - Attachment for handlebar - Velcro straps attachment
Tool Wrap WP
The B-RAD Dogbone allows for the bottle cage to mounted off center with additional B-RAD accessories, without needing the B-RAD base. Most commonly used for smaller, curved or dual suspension frames where the slotted bases won't fit or are not needed.
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Three slots for additional adjustments over the B-RAD 2 base - Compatible with triple bottle mounts on forks or frames, use neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
While the classic seat pack is a great place to store little-used essentials out of the elements, their mounting systems can interfere with and often damage modern dropper seatposts. Valais allows the use of a traditional seatbag on a dropper seatpost. - Allows the usage of seat packs on a dropper post - Protects the dropper stanchion from wear and grit - Can act as a travel limiter when full drop isn't needed - Sized by stanchion diameter
The B-RAD Accessory Strap Mount is designed to add an additional strap point for tire levers, tubes or CO2 cartridges. Mounts to bottle bosses, or to the B-RAD base for additional carrying options. - Mounts to bottle bosses, or to the B-Rad base for additional carrying options - Main strap is 50mm wide and holds loads 75-120mm diameter (3 - 4.75 inches) - Cradle strap is 40mm wide and 350mm long for supporting loads
The B-RAD pump bag protects your frame pump from water and dirt ensuring it is working when you need it. - Mounts to the B-RAD system or on its own - Dimensions: 12 in x 2.5 in x 2.5 in (30 cm x 6.5 cm x 6.5 cm)
Replacement hardware, bolts and nuts for Wald baskets. Works with Wald Basket models: 520, 520GB, 535 and 535GB
The Gel Fuel Rack / NDM 1 give the user the ability to reach their gels and similar snacks at any time while our on the trails. The "grab-n-pull" aspect of the rack makes it super fast for you to fuel up with new energy. The accessory is compatible with backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. This attachment is compatible with the following products: - Raw - MTB Hydro - Airborne - Ranger - Patriot - Vertical - Outlander (NOT Compatible with Outlander PRO) With the Gel Fuel Rack / NDM 1 you'll always have instant access to your gels or other small snacks. The "grab-n-pull" make it super fast to fuel up with new energy. The accessory can be attached to the harness of all backpacks equipped with the No Dancing Monkey 1.0 and No Dancing Monkey 1.2 harnesses. The accessory is simply attached to the Velcro shoulder strap. This attachment is compatible with the following products:
QuickClick mount for racing type saddles. Works with all Topeak Wedge Bags. - Material : Injected Nylon - Weight: 30g / 1.06 oz
Fast and easy attachment of Topeak handlebar bags. - Clamp: Fits 25.4/28.6/31.8 mm Handlebars (shims included)
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Take your bike adventures even further with a versatile mount cage to pack larger gear on your bike. The included tie-down straps provide the ability to carry a DryBag, sleeping bag/pad, stuff sack, or any round shaped gear on your bike frame or fork with bottle bosses. A four-hole mount design offers height adjustment of your load for better balance. VersaMount clamps also provide easy installation and flexible mounting options. - Fits tubes 20-60mm. - Engineering grade polymer - 64 mm mounting height adjustable - Weight: 128g - Max load: 3kg / 6.61lb - Dimensions: 22 x 12 x 7cm / 8.7 x 4.7 x 2.8-inches
MTX QuickTrack compatible TrunkBag featuring a divided main compartment constructed with Topeak's unique process of combining rigid panels and flexible fabric for structure and water repellency. Features two mesh side compartments for extra capacity and rear water bottle holder lets you carry more water on extended trips. - Attachments: 1 divided main compartment, two mesh side pockets - Capacity: 8L / 480 ci - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 35 x 21 x 19 cm / 14.2” x 8.3” x 7.5” - Weight: 870 g / 1.92 lb
Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb
Allows Thule Yepp Maxi to be installed on a bike with a rear rack with a load capacity of at least 35 kg/78 lbs and the ability to carry seat and bike bags. Features: - Fits rear racks measuring 11-17cm/4.5-6.7" - For use on rear racks with a load capacity of at least 35kg/78lbs
An urban pannier complete with a padded laptop sleeve and a waterproof design, perfect for bike commutes. Features - Includes one 17L pannier bag - Protect contents from heavy rain or splashing with IPX4 waterproof rating - Securely attach and easily remove from 8-16mm racks without using adapters - Protect your 15" MacBook/14" PC in the padded compartment - Additional padded storage for a 10.5" tablet and files - Quickly access your phone, keys or wallet in the exterior pocket - Easily carry off the bike with removable shoulder strap - Stay visible and safe with light attachment loops on both sides of bag - Enhanced visibility thanks to the reflective panels Technical specifications - Dimensions: 14.57 x 7.87 x 15.75 in - Volume: 17 L - Weight: 4.30 lb - Waterproof: IPX4
This set of waterproof touring panniers comes with an easy-to-use attachment system making it perfect for any bike journey. Features - Includes two 13L pannier bags - Protect contents from heavy rain or splashing with IPX4 waterproof rating - Securely attach and easily remove from 8-16mm racks without using adapters - Keep papers and small items organized and protected in three interior pockets - Easily carry off the bike with removable shoulder strap - Stay visible and safe with light-attachment loops on both sides of bag - Enhanced visibility thanks to the reflective panels Technical specifications - Dimensions: 12.2 x 7.09 x 12.2 in - Volume: 13L - Weight: 3.35 lb - Waterproof: IPX4
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
Spruce-up a well-loved Dummy bag with replacement parts from Surly.
The Loop Junk Strap is the same 120cm woven nylon strap with a stainless steel buckle that Surly's regular junk strap is. The Loop Style Junk Strap, however, has a loop sewn at each end of the strap so you can wrap them around small diameter tubing like that used for racks and handlebars. They secure in the middle with the stainless steel buckle. Surly made these Loop Style Junk Straps because it offers another method for those wanting to secure cargo to their racks and or bikes. Junk Straps of any kind are useful in many different situations so toss a few in your backpack and always be ready to tie something to anything else. - For general tie down use - 42" loop strap, plus 8" closure buckle strap
Extend the life of your Dummy bags with this replaceable wear patch.
$12.50 - $25.00
Surly Front Rack Hardware
Replacement Surly Bicycle Mounted Rack Parts - Direct replacement item for Surly racks - Replacement upper tubes, made from Stainless steel
Suitable as a tourniquet or stylish headband in a pinch, the Whip Lash's primary function is to help you attach whatever needs attaching to your bicycle frame. Available in a multi-pack that includes two 550mm lashes and one 695mm lash, the Whip Lash's potential is limited only by your imagination. You could use one to strap your beverage to the down tube when the trail says you ought to keep your hands on the bars. Or you could use another to fix your fishing gear to the top tube when rack space is maxed out. Whatever you get into on or off the bike, they're handy to have around because they're light, compact, and easy to use. Rubberized on one side to keep your stuff from slipping around, the Whip Lash's trimmable design features nylon construction and a simple hook-and-loop style closure.
$24.00 - $28.00
Designed for use in the Surly Petite Porteur House. Neon color to make it easier to find objects inside a dark bag. - Urethane coated, water-resistant nylon stuff sacks - Drawstring closure
All the hardware for the lower portion of your Surly rear rack. Stainless steel.
Surly's Dummy Rail Collars are nothing more than a simple clamping device that buttresses the connection between your Big Dummy Frame and the Dummy Rails. They increase the stiffness of the interface of these two parts and help keep your cargo from getting its salad tossed… unless of course your Dummy Bags are filled with tossed salad. These are designed specifically for use with the Big Dummy frame and Dummy rails, and will not work with Xtracycle rails. WARNING: Properly installed Dummy Rail Collars are required for carrying live cargo on your Big Dummy.
Surly's Junk Straps are basically really long toe straps. They're 120cm woven nylon with a stainless steel buckle. Surly had them made to specification to ensure that they work well and last a long time. They're easy to use and they stay tight. Once you're ready, loosening them is quick and easy. They're light, pack small, and securely and conveniently attach all kinds of stuff to your rack, basket, handlebar, backpack, under your seat, around your thigh…just about anyplace. You can combine them for even longer straps. - Pack of 6
Surly's Dummy Deck provides a light, durable platform for cargo bikes, built to Xtracycle's Longtail standard — including the Big Dummy, of course. The Dummy Deck is stamped from 4mm-thick aluminum, chosen for its strength, durability, and recyclability, and it bolts directly to Surly Dummy Rails to stiffen and stabilize the whole system (it's also compatible with Xtracycle V-racks by using Xtracycle's SuperHooks). It features cut-outs for routing straps and cordage, a mounting hole for a rear light bracket, accessory-mounting holes, and countersunk holes for SuperHook hardware.
Dummy Rails support Dummy Bags on your Big Dummy cargo bike, and Surly's Dummy Deck bolts directly to them, stiffening the whole system for a more stable load. Dummy Rails are made of light, strong aluminum and were designed in conjunction with the Dummy Deck and Dummy Bags; each component works best when used with the others. Like all Surly products, they've built in lots of useful details. For example, the deck-attachment bosses stick up from the rails to create space between the deck and rails, providing windows to route tie-down straps and cordage; and threaded bottle cage bosses located at the rear of each rail provide mounting locations for accessories: bottle cages of course, or lights, cameras, pumps, flags, horns, light saber scabbards, disco balls, spittoons, cornucopias, etc. Dummy Rails will work with cargo frames (including the Surly Big Dummy) built around Xtracycle's longtail standards.
You're lookin' at the Surly Big Dummy Bag Version 2.0. Just like the original, it's designed to work with Dummy-style rail systems found on cargo bikes like our Big Easy, Big Dummy, and Big Fat Dummy. We've made it easier to install, simpler to use, and refined its size and shape to better suit the stuff we haul most often. The sequel is slightly smaller, but you can still cram two full grocery bags in there on shopping day. Three if you like your potato chips pulverized. The Big Dummy Bag features an expandable cargo flap and side panels that can lie flat or cinch up to accommodate loads of varying dimensions. It also has two sizeable inner pockets with a dedicated divider so you can keep your legal documents tidy. It's furnished with adjustable daisy chains, straps, and buckles to help you secure bulky shit that may not fit otherwise, as well as three stainless steel drainage ports so you can hose it out after hauling your compost to the dump. Lastly, the bag's main body is tough 1680D nylon and its liner is 400D nylon. The material is also bluesign® Approved. So are the buckles and other hardware. This means the materials are sustainably produced to have the lowest possible impact on humanoids and our environment. - 22.5L capacity per bag
The EXP Series Direct Mount Thumb Screws allow for quick and easy attachment of Salsa EXP Series Direct Mount Packs to bicycle frames equipped with direct-mount locations. - Can be installed and removed by hand or with allen key - Includes necessary 0.5 mm washers and 4 mm spacers - Sold in packages of two
- Diameter: 8mm - Overall Length: 345mm - After Bend: 270mm - 45 degree bend
- Fits Salsa Minimalist and Alternator Racks - 8mm x 370mm
Stash your ride snacks, repair kit, or other ride essentials in this secure and stylish KEG. - Fits in standard bottle cages - Keeps contents secure and dry - Matches Salsa Dawn Patrol socks, bottle, and hat
Lower mount kit for all Salsa's Alternator Racks (sold separately)
The Salsa EXP Series Rubber Strap is a strong, adjustable strap that holds your gear securely to Salsa Anything Cages, Anything Cradles, or racks. Use them anywhere you need to secure a load on your bike. - UV- and weather-resistant - Includes band to keep excess strap out of the way - 22" length is best for use with Salsa Anything Cage and Anything Cage HD - 30" length is best for use with Salsa Anything Cradle - Sold in pairs
The Salsa EXP Series 35.0 Anything Cradle Arms are for mounting the Salsa EXP Series Anything Cradle (sold separately) to handlebars with a 35.0mm or 31.8mm clamp diameter. - Compatible with 35.0mm bars or 31.8mm bars (with included shims) - Compatible with all Salsa EXP Series Anything Cradles - Hinged clamps allow for easy installation and removal from handlebars - Made of 6061 forged aluminum
- Spacers for Explorer Exp Barbag
The QuietKat Pannier bags are the perfect accessory for hauling your gear with you on your Ebike. Made from marine-grade, waterproof PU material, the bags roll up like a dry-bag to keep your gear clean and dry in any condition. Perfect for packing in extra gear for a hunt or a weekend camping trip. The pannier design allows for quick attachment and removal from the rear pannier rack and comes with a handle for easy carrying off the bike. Sold individually, not as a pair and requires Pannier Rack for installation. - Dry-bag style fold and clamp design - 3,300 cubic cm of storage per side - 8" x 13" x 13" approx. inside dimension - Quick release attachment and removal - Single Bag – order 2 bags for a complete set
The Problem Solvers Seatpost Clamp with Rack Mounts is an ingenious adapter that gives you a super-secure and clean way to mount a rear rack on your bicycle. This light and durable aluminum piece simply takes the place of your seat tube collar. It includes a stainless-steel binder bolt and 2 5mm screws for rack attachment.
Compatible with Shiner and Shiner Back lights - Rubber pad with loop straps to quickly mount and remove light for recharging - 50mm bolt spacing to fit most rear racks
The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side
Universal shoulder strap for ORTLIEB bags. Includes D-rings, plastic shoulder pad and carabiners. For Bike-Packer and Sport-Packer models from 2009 and for all Back-Roller City, Sport-Roller City and Gravel-Pack models. DETAILS: - 1 shoulder strap with carabiners
This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws
The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.
- Strap with buckle and hook for supporting the Seat-Packs - Prevents lowering of pack with uneven weight distribution - Additional support for Seat-Pack straps when fully loaded - Excessive strap is fixed with Velcro - Can be used for Seat-Pack M and L
Many e-bike owners are well-acquainted with this problem: bags and baskets that can't be attached to the handlebar because the e-bike display is in the middle of the handlebar. The ORTLIEB E-Bike Mounting Set comes to your assistance without forcing you to relocate the display. The lockable adapter is mounted to the handlebars with the proven cable fastener. This gives you a theft-proof way of attaching your ORTLIEB handlebar bags and baskets despite the display. The fastener is made for attachments of up to 5 kg. - suitable for all handlebar diameters up to 35 mm - duplicate set of keys - mount compatible with products by Rixen&Kaul (KLICKfix System) - bags can be locked to the handlebar with the integrated lock - additional safety in traffic thanks to the reflective material on the mount block
Ortlieb's Ultimate6 Mounting Set uses an integrated lock to secure your Ultimate6 bag (sold separately) to your bars. Additionally, the lid of the Classic, Plus and Pro models can also be locked. Whether you need one to mount the bag on a different bike or simply want spare parts for a long tour, the mounting set is an indispensable part of the Ultimate6 system.
Your spacious one-click shopping bag: the Bike-Shopper with QL2.1 system can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable – even on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from the rain. Occasional use of ORTLIEB lubricant will keep the closure running smoothly. Further Features: - Internal valuables pocket in size DIN A4 - Padded carrying handle - Lateral 3M-Scotchlite reflectors Advice: Temperatures below -5°C/23°F may affect the function of the sealing lip!
E-Mate has been designed by ORTLIEB especially for E-Bikes: a waterproof rear pannier with the proven QL2.1 mounting system. With 16 liters volume it takes anything for a comfortable day trip or a city tour by E-bike, offering room for a spare battery and the E-Bike display. The bright colored interior allows easy packing; the main feature: a padded and removable sleeve holds a battery (compatible with Bosch, Shimano, Yamaha, Bionix). The E-Bike display can be nicely stowed inside a zippered lid pocket. An outer mesh pocket helps keep things organized and allows quick access to the contents. The new magnetic closure allows quick access to the bag. Thanks to interior stiffeners the bag is stable and will stand alone, helpful when packing. The padded shoulder strap ensures comfortable transport of the pannier. Grey reflectors ensure safety from dusk to dawn. E-Mate is sustainably produced in Germany and made of PVC-free nylon fabric. The ORTLIEB QL2.1 system allows fast and easy single-handed mounting and removal of the panniers to almost any carrier. The system is adjustable without requiring any tool, and is suitable for racks with a tube diameters up to 16mm (hook inserts for diameters of 8, 10 and 12mm are included) The hook rail on the lower rear side of the pannier serves for additional fixation; it is made of a two-component synthetic combination with anti-scratch function. This reduces abrasions on the carrier and prevents damage to the rack tubing. Thanks to the QL2.1 mounting hook rotatable in 45° steps the system is compatible with almost any bike rack. A 20 mm hook is available as optional accessory (article code E193) for carriers with larger diameter. OPTIONAL ACCESSORIES - QL-anti theft device (long), 20 mm Quick-Lock2.1 hook, bottle cage, outer pocket (each sold separately)
Page 1 of 3 Next page