Other

Compatibility - 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only - 3, 5, 10, and 15mm included

-Rust resistant coating -Bag of 10 -M5 x 16 -Braze-on bolt

• Designed to keep dust and dirt out of V-Brake cable/housing systems

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Aheadset preload adjusting bolt

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

High-grade nuts for most solid-axle equipped bikes. 9.5mm x 26tpi Thread Sold Separately

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

Product details - Use in chainstay pocket to seal sensor into frame

Dial in the perfect cockpit by spacing your stem with these lightweight, easy-to-install Aluminum Headset Stack Spacers from FSA.

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

- Replacement pins for 9-speed Shimano chains - Compatible with CN-7700/HG92 chains - 3 replacement pins per pack

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

BB30 Spacer - 15.46mm

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Shimano Front Derailleur Cable Fixing Assembly

- QR adapter washer for the Surly Tuggnut/Hurdy/Snuggnut

Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5

Replacement M3 x 10 Socket Head Screw fastener for derailleur hangers. - Thread: M3-0.5 - Thread length: 10mm - Use with 2.5mm hex wrench - Bag of 5

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

Aluminum headset stack spacers precision-cut to ensure proper headset function. - Precision-cut for proper function - Inner Diameter: 28.9mm - Outer Diameter: 34.4mm - Precision-machined aluminum

The Tanpan ferrule converts standard Tanpans to Tanpan inlines. - Coverts Tanpan into Tanpan Inline

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack

Jagwire Slick Derailleur Cables. · Slick wires are die-extruded and pre-stretched for smooth operation · Fits 2008 & older Campagnolo shifting systems Specifications: Defined Color: Silver Length: 2300 mm Width: 1.1 mm

- 90 degree

- Noodle/Boot completely seal brake cable, upgrades most linear brakes

A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use. - Fits all generations of Reverb and Reverb Stealth - Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

Shimano Y8H298040 SM-BH59 Olive and connecting insert

Shimano Rear Derailleur Cable Anchor Assembly - Fits SLX M7000-10

Jagwire's Brake or Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of up to 1.8mm-diameter cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in colors to add a little style to your bike.

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2

The Odyssey stem bolt pack features 6 - 6mm stem bolts that are M8 x 1.25mm thread.

Velo Saddle Clamps are designed for seatposts that do not have a clamp on top. · 7/8" Inside diameter Specifications: Defined Color: Black keyword search: seat guts

- Replacement seat clamp bolt, nut, and washer for Thomson Elite Dropper seatposts - Compatible ONLY with Thomson Elite Dropper posts

Wolf Tooth Remote Pivot Axle

- Saddle clamp for straight seatpost - Diameter: 22.2mm

Replacement inserts for Thudbuster G4 suspension seatposts.

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - S.H.I.S. Stem Clamp Diameter: 25.4mm

Single sided, bottom bracket mounted cable guide, with integrated cable housing stop. - Intended to fit 40mm diameter bottom bracket shells - Includes M5 mounting bolt - Direct replacement for: Salsa Vaya, Salsa Warbird (Alloy), Salsa Journeyman, All-City Cosmic Stallion, - All-City Gorilla Monsoon, All-City Macho King, All-City Space Horse Disc

The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Hardware is specifically designed for, and only compatible with, Salsa frames using the Alternator 2.0 dropout system. - For use on 2017 and newer alternator 2.0 Adjustable plates only - Please reference hardware kit FS2351 for fixed position plates - Please reference hardware kit FS2350 for adjustable plates

Frame Plugs for Internal Cable Routing

Single Frame Plug for Dropper Routing

Unique design with Thermalite for durability. In-moldED Steel insert to eliminate bar punch through. Expands securely with a grub screw to fit tightly on regular, 9, 11, & 13 butt bars. - Expands securely with a grub screw to fit tight - Material: Thermalite - Weight: 1.0-ounces per pair

All-City replacement bolts and adjustment springs for the Hennepin Bridge and Space Horse dropouts. - Sold as a pair; two bolts and two springs - M4x0.7mm thread - Length: 45mm