This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions. - Highly absorbent - Measures 30cm x 115cm
The Trainer Adapter for X-12 Axle allows the use of mountain bikes with axle widths of 142mm or larger on a Tacx trainer. These adapters are only suitable for the Tacx classic trainers.
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
Look, your child is destined for greatness. We won't dispute that. But, why wait until they can walk for them to rock their awesomeness? If they're crawling, they're ready to explore the world. Attach the Strider Rocking Base to a Strider 12 Bike and get them rocking. The rocking base doesn't just familiarize them with a bike, the rocking motion helps develop their balance, spatial awareness, and core strength. No batteries. No annoying sounds. Just pure, rocking fun. - Compatible with the Strider 12 Classic, Sport, and Pro Balance Bikes - When the Strider 12" Bike is attached this product is intended for ages 6 months – 5 years old for Strider Sport and Pro, and ages 6 months – 3 years for Strider Classic.
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
Take on any race, club ride, or weekend adventure with confidence. When you add Saris rollers into your training routine, you'll increase your balance, control, and ability to ride a straight line — all of which translate to more efficiency, power, and technique on the road. And, because you have to pedal 100% of the time to balance your bike, you get an amazing workout, no matter your pace. - Improve balance, control, and ability to ride a straight line. - Aluminum roller drums run silently and smoothly. - Precision-lathed 3.25" aluminum roller drums won't distort in heat or sunlight. - Fold flat or stand on end for convenient storage. - Designed for both indoor and outdoor use - 16" wide wheel base fits just about any size of bike and allows plenty of room to move around. - Rubber foot pads ensure that the only thing moving on the rollers are the drums, providing a secure, sturdy ride. - Durable steel-frame construction - Adjustable belt for right and left dismount - Resistance Roller uses zero moving parts to deliver quiet magnetic resistance. - Maximum wheelbase 44.5" (axle to axle) - Minimum wheelbase 37.5" (axle to axle)
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
A Killer Training Combo What happens when you pair a speed sensor with the #1 selling bike trainer in the USA? You get a combo that’s ready for any virtual—or non-virtual—training ride. It’s the ideal setup for budget-conscious athletes looking to join fun, virtual communities, like Rouvy and Zwift, without a traditional smart trainer. Simply install the magnetless speed sensor on the rear wheel of your bike, mount your bike to the solid Fluid2 trainer with our innovative club knob, connect to your virtual training app of choice via Bluetooth or ANT+, and voilà! - you’re ready to sweat. Product Features - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Included speed sensor connects you with Rouvy, Zwift and other indoor cycling apps. - ANT+ USB and BlueGiga USB sold separately. - Includes one month subscription to Rouvy virtual training app In the box: - Fluid² Smart Equipped Bike Trainer - Dual-band magnetless speed sensor - Fluid² is the best-selling trainer in the USA. - Fluid resistance unit creates optimal road-like feel. - Fluid resistance unit provides a quiet and consistent ride. - Noise level at 20 mph is super quiet 64-68 decibels. - Large, individually precision-balanced flywheel allows for improved road-like feel. - Self-cooling mechanisms including a patented fan design keeps the unit performing better, longer. - Eccentric leveling feet allow for easy adjustment on uneven surfaces. - Comes on the foldable Classic frame with spring loaded, bolt-action lever. - Precision-machined alloy roller reduces tire wear and slippage. - Features clutch knob for perfect roller-to-tire tension each ride. - 2" resistance unit roller allows for 650b, 700c, 26", 27" and 29" wheel sizes – up to a 2.0 tire. - This trainer is designed to fit common road and mountain bike frames with included steel quick release skewer and has three settings for rear dropout spacing: 120mm, 130mm and 135mm. - Trainer tire recommended. - Compatible with indoor cycling apps. - Trainer is tested to the combined weight (rider and bike) of 300 lbs. - Optional thru-axle adapter available for 142x12mm and 148x12mm bikes. - ANT+ USB and BlueGiga USB sold separately. - Formerly branded as CycleOps Fluid² Smart Equipped
Better health. Faster splits. More me-time. Whatever your goals may be, the Fluid2 helps you get the most out of each indoor training ride. The large, precision-balanced flywheel (with patented fan design) lets you easily customize each ride simply by shifting gears, just as you would outside. This design also helps keep your Fluid2 working better – longer. And, thanks to our built-to-last manufacturing process, the Fluid2 can help you conquer one goal after the next. - Fluid resistance unit provides a quiet and consistent ride. - Progressive resistance offers the widest resistance range and road-like feel. - Best-selling trainer in the USA - Compatible with Zwift and other indoor cycling apps
Reliable. Durable. Quieter Than Ever Before. When it comes to indoor bike trainers, the most frequently asked question is: how quiet is it? Taking this to heart, our Madison, Wisconsin-based team put this query under the microscope and set a goal to build a trainer so quiet, that the only sound is that of your drive train. The result? A direct drive smart trainer that touts a sound specification of 59 decibels at 20 mph. In other words, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Following the Saris direct drive smart trainer legacy, the H3 features the same reliably and durability as its predecessors. Each H3 is made from cast and machined aluminum sourced from America’s heartland. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified. Specs - Noise level: 59 decibels at 20 mph - Power measurement accuracy: +/- 2% - Maximum power output: 2000 watts at 20 mph - Simulates a 20% climbing grade - Fast response electromagnetic resistance - Measures speed, cadence and power – no external sensors needed - 20 lb precision balanced flywheel - Integrated dual ANT+ FE-C and Bluetooth FTMS standards - Built-in front wheel block - Integrated carrying handle - Compatible with Shimano 8-11 speed cassettes - XD/XDR freehubs sold separately (link) - Thru-axle compatible for bike frames with fork widths of 142 or 148. - Quick-release compatible for bike frames with fork widths of 130mm and 135 mm. - Compatible with a wide variety of devices and indoor cycling applications, including Rouvy, Zwift, TrainerRoad and many more. Contact us with questions about compatibility with other software. - Headless mode (powered on, not paired to any apps) lets you ride with a progressive resistance curve that matches the Fluid2 (link). - LED indicator lights communicate connectivity and more. - Direct drive design directly connects the bicycle to the resistance unit, eliminating tire wear. - Internal cooling technology ensures accurate ride data even during the hardest of workouts. - Folding legs provide widest footprint of direct drive indoor bicycle trainers on the market for added stability and easy storage. - Accessible and balanced handle allows for smooth, anyone-can-carry transit of the trainer. - Over the air (OTA) firmware updates and calibration via the Saris app (link to firmware page) - Maximum weight (rider and bike): 300 lbs. - Dimensions when Open L*H*W: 31x18.5x19.5 inches (787.4x469.9x495.3 mm). - Dimensions when Closed L*H*W: 8.5x18.5x19.5 inches (76.2x469.9x495.3 mm). - Weight: 47 lb. (21.3 kg). - Cassette sold separately.
All-in-one H3 package with everything you need to connect to Zwift and Rouvy. Everything You Need to Train Smarter, Harder & Quieter Joining the virtual training world can be overwhelming. That’s why we’ve built this do-it-all package to take all the guesswork so you can simply connect and ride. With this bundle your H3 smart direct drive trainer will come with a pre-installed 11-speed cassette, as well as all the accessories needed to pair to your favorite indoor cycling app. Unsure which app is right for you? We’ve got you covered there too with the included 1-month subscription to Zwift, ROUVY, and TrainerRoad. And when it comes to the trainer itself, the H3 features the same reliability and durability as its predecessors – only quieter. At 20 mph and just 59 decibels, the H3 is five times quieter than previous generations, making it the quietest smart trainer to ever leave our doors. Encased inside are components meticulously calibrated to measure power, speed and cadence, as well as a precision-balanced flywheel - all built to handle 2000 watts and replicate a 20% climbing grade. Tested to withstand heavy training, the H3’s internal cooling system will keep the electromagnetic resistance system working – and accurate – long after your legs have given out. Product Features - All-in-One: includes pre-installed 11-speed cassette, ANT+ USB dongle, USB extension cable, sweat guard and 1-month subscription to Zwift, ROUVY, and TrainerRoad. - Quieter Than Ever: all new drive system shaves decibels off previous generations. - Precise Training: +/- 2% power accuracy. - Controlled and Consistent: electromagnetic resistance provides a measured workout every time. - Direct Drive Design: widest bike compatibility and eliminates wheel slips. - No External Sensors Required: measures speed, cadence and power. - Seamless Integration: connects to indoor cycling apps with dual ANT+ FE-C and Bluetooth FTMS standards. - Zwift certified.
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
A League of Its Own Since their inception, bike trainers have set out to solve one problem: simulating outdoor riding, indoors. Then came smart trainers and indoor cycling apps, complete with virtual races, group rides and controlled workouts. Suddenly athletes across disciplines were eager to ride indoors. The indoor training renaissance isn’t over. To make the experience even better, and to harness all the benefits riding indoors has to offer, you need a way to stay comfortable and engaged. The MP1 Nfinity Side-to-side movement isn’t new, but it also doesn’t capture the natural movement you experience outdoors. The MP1 with Nfinity technology truly moves the way you do because it adds the fore/aft axis to the equation. The MP1 combines over 20 years of indoor training expertise to not only create the movement platform category – but to perfect it. The result is an unparalleled trainer platform that reimagines the indoor trainer experience altogether. Features Introducing Nfinity Technology In order to bring stationary cycling to life, the MP1 needed movement in multiple axes. The result is an innovative technology combining curves, axes, gravity physics and mechanical ingenuity. The MP1 is the only way to experience this revolutionary technology. Compatible with Nearly Any Bike Trainer If you can experience the freedom of movement indoors, then why limit access with trainer compatibility? We believe that anyone with a bike trainer that fits should be able to tap into the benefits of Saris Nfinity Technology via a ride on the MP1 – which is pretty much everyone. So grab your trainer and check our bike trainer fit guide. Increased Comfort Riding a bike indoors can be uncomfortable because your movement is typically limited by the trainer. Pressure mapping and motion capture technology shows the MP1 significantly alleviates saddle and foot pressure compared to riding a static trainer. Recruit More Muscles It’s true that adding your trainer of choice to the MP1 engages more muscles than a stationary ride. From engaging the upper body to get through sticky spots to activating smaller, key muscles to stay balanced, the MP1 is the only way to recruit large and small muscle groups while riding inside. Adjustable Touch Points The MP1 is compatible with a wide range of setups. Complete with adjustable touch points and well-placed grip tape, the MP1 platform can be used with nearly every indoor bike trainer and training footprint. Looks Good, Too The MP1 looks as good as it moves. The platform deck is made from beautiful birch, while steel sourced from America’s heartland ensures the MP1 can handle the hardest of efforts. For the most cohesive aesthetic, the MP1 is the cornerstone of the Saris trainer eco-system, complete with the trainer desk and smart trainer of choice. It’s Fun, Pure and Simple Our goal was to make the time spent indoors as enjoyable as possible. The movement platform not only enhances the virtual training experience, the MP1 with Nfinity Technology brings indoor training to life. - Nfinity Technology: revolutionary tech that brings movement indoors. - Movement for All: compatible with a variety of training configurations; bikes, desks and nearly every trainer available. - Trailblazing: the MP1 ushers in a type of riding never seen or felt before. - Pure Fun: a responsive, immersive and authentic training experience that’s anything but boring. - Get Comfortable: reduces pressure on touch points so you can put in the miles. - Eye-Catching: mix of steel, aluminum and birch compliment most training spaces. - Personalized Eco-System: put the MP1 at the center with your trainer of choice to create your ideal training station. Specs - Max Fore-Aft Travel: 9.5” - Max Side-to-Side Angle: 6° - Compatible with all major brands and models of bike trainers. - Materials: Steel, aluminum and birch - Weight: 62 lb - Dimensions: 6” tall x 63” long x 35.5” wide - Fully assembled in box - Grip tape strategically placed to assist in walking on the trainer platform. - Tested to the combined weight (rider, bike and trainer) of 350 lb. - Built-in front wheel block for road and MTB.
Adjust resistance on Mag trainer without leaving the saddle. - Quick Release mounting system fits most stems. - For use with the Mag bike trainer only
Keeps corrosive sweat from reaching your frame. - Cell phone pouch included.
Trainer Mission Control Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland. And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one. - Stay Charged: built-in power strip keeps training necessities nearby and powered up. - Pick Your Height: adjustable for wide range of bikes and training configurations. - Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride. - Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing. - Enhanced Experience: a great addition to indoor training. Specs - Base: 13-inches wide x 36-inches Depth - Desk Top: : 12-inches Width x 20-inches Depth - Adjustable Desk Height from Floor: 40- to 55-inches - Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware - Cord Length: 6- foot AC cord - Built-in power strip with 2 AC and 2 USB outlets - Built-in cord retention clips for easy cable management and a clean look.
Everything you need for the best indoor trainer experience possible. - Can be used across a wide range of trainer setups. - Includes Trainer Mat, Climbing Block and Saris towel.
- Includes clutch knob and L-bolt - Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt - Magnus Clutch Knob should only be used with Magnus Smart Trainer - Watch our video to learn more
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
Our Trainer Axle is designed to adapt your Surly MDS/Gnot Boost thru-axle-equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - This axle is for Surly bikes with the MDS/Gnot Boost system. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum, and hard-anodized for rugged durability. - No special tools required. Design allows for wheel installation or removal using your standard 5 mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike
$17.95 - $19.95
- Replacement belt - Select model based on model/roller size and belt size
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party! - Non-slip surface keep you safe while in cycling cleats - Protects floors from sweat and bike grime - Water-repellent surface does what it was designed to do – keep sweat off your floor - Compress-ability ensures trainer stays put during intense efforts - Easily rolls up for storage - Cleans easily with soap and water - Absorbs noise and vibration - Enhances overall stability of any indoor trainer setup - 4mm (5/32?) thickness is optimal balance of support and storage
Love training when you travel? Need an awesome warm-up and cool-down during weekends at the races? Want to crush that indoor bike trainer workout in a small living space? Meet the Omnium Over-Drive Portable Bike Trainer. The adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any stationary bike trainer available. Plus the precision rollers and internal progressive resistance design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides it in its padded tote like it was never there. Add a Sweat Guard and Trainer Mat and you’re armed with the complete training package. - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Patented, Internal Progressive Resistance via friction-less Eddy Current - Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance) - Adaptable fork-mount and adjustable sled design (16”-29” wheel; Thru-Axle and QR compatible) - Lightweight design for a complete bike trainer system – 14lb (6.35kg) - Precision machined 4” aluminum rollers create a smooth and quiet ride - Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm - Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry (up to 1348mm wheelbase with optional extender) - Maintenance-free resistance unit and roller bearings - Includes heavy-duty tote bag for easy transport and storage - Compatible with cycling apps: Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features* - Patent number: 9,393,475 *Requires ANT+ or BT rear wheel speed sensor
Love riding when you travel? Weekends spent at the races? Or just want to be able to train in a small living space? Meet the Omnium Zero-Drive Portable Trainer – stable like a standard trainer with the minimal resistance of traditional rollers. This foldable, compact and adaptable fork-mount design keeps the rear wheel on the bike and offers the most dynamic ride quality of any trainer available via LIVE RIDE Technology ™. Plus it’s unique roller design is so quiet you’ll never disrupt the neighbors. When you’re finished, the elegant folding design hides in its padded tote like it was never there. Add a Sweat Guard and Floor Mat and you’re armed with the complete training package. - Zero Resistance is ideal for high-speed spinning and track cycling workouts - Resistance curve maxes out at ~150 watts - LIVE RIDE Technology™ delivers a dynamic, realistic riding experience for comfort and performance - Adaptable fork-mount and sliding sled design (16”-29” wheel; thru-axle and QR compatible) - Fork mount provides ample clearance for postmount and flatmount disc brake systems - Lightweight 13.3lb (6.03kg) design makes it the ideal, portable cycling training partner - Precision machined 4.25” aluminum rollers create a smooth and quiet ride - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer Included fork adapters: - 9mm Quick-Release - Thru Axle: 12×100mm, 15×100mm & 15×110mm Available fork adapters: - Cannondale Lefty, 20x100mm (BMX thru axle), 8mm x 74mm (folding bike) - Adaptable to virtually any bike size and geometry - Optional Sled Extension (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for cycling training and fold for storage and travel - Maintenance-free resistance unit and roller bearings - Includes heavy-duty, water- and abrasion-resistant tote bag for easy transport and storage - 225lb (102kg) weight limit
You’re already a proud owner of the Omnium Zero-Drive Bike Trainer, but today you’re looking for a sweat-inducing, intense workout. Designed to be lightweight and portable, the Omnium Trainer is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Omnium Over-Drive Sled be your next training accessory. - Dynamic, free-floating rear wheel design promotes the most realistic riding experience of any stationary bike trainer - Patented, Internal Progressive Resistance via friction-less Eddy Current Technology - Parabolic, progressive resistance curve accurately simulates outdoor cycling (rolling + wind resistance) - Precision machined 4” aluminum rollers create a smooth and quiet ride - Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender) - No tools required to assemble or store — simply unfold for use and fold for storage and travel - Maintenance-free resistance unit and roller bearings - Compatible with Zwift, The Sufferfest, TrainerRoad and Kinomap traditional trainer features* *Requires ANT+ or BT rear wheel speed sensor
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our absorbent Sweat Guard is designed to keep your carbon, aluminum and steel frame and components safe from corrosive sweat while mimicking your favorite spin class at home. And because your cycling training plan asks for incredibly intense efforts, the Sweat Guard ensures not a drop of sweat will hit your frame during leg-busting intervals. Add a Floor Mat to your indoor cycling collection and you’ve got a training party! - Ultra absorbent terry cloth material - Protects carbon, aluminum, and steel frames and components - Adjustable to fit most any bike - Simple setup and removal with Velcro handlebar mounts and elastic seatpost strap - Machine washable, cold
The Elite Direto XR-T is the home trainer you've been seeking for your indoor training this season. This trainer is the biggest evolution of the Elite Direto trainers, featuring an integrated power meter. It is ideal for reaching the highest level of performance and working out in a totally immersive home training experience. - Just like Suito, the Direto XR-T trainer will help you work out on your bike in the easiest and quickest fashion since the first unboxing. - Very stable, Direto XR-T folds quickly for storage when not in use and features a practical integrated handle that makes it easier to carry it with you. - The Direto XR-T is a direct-drive home trainer, meaning that it is one of the quietest home trainers on the market. Integrated power meter - The OTS (Optical Torque Sensor) ensures Direto XR-T the greatest data accuracy while you're training. This is an innovative integrated power meter for the home trainer to measure power output with to within 1.5% error, 0.5% less error tolerant than the original Direto trainer. - The Elite Direto XR-T is the only home trainer in the world, along with the original Drivo, Drivo II, Direto, and Direto X trainers, to actually measure your power output via an integrated power meter. That's why it sets itself apart as one of the most accurate home trainers on the market. Incredible slope simulation - The Direto XR-T is an interactive home trainer, so it automatically varies resistance during your training. With an upgraded and bigger flywheel, the Direto XR-T is able to simulate up to an incredible 24% slope gradient—10% more than what the original Direto could do and 6% more than the Direto X. - This unprecedented power level ensures excellent performances even during particularly intense training sessions—you'll be able the check out all your training charts at a glance, conduct tests to evaluate your fitness level, do reps and high-speed sprints at max power. - Any type of training you want is available to you riding on the Direto XR-T. Super compatible - The Elite Direto XR-T ensures total compatibility with both road and MTB bicycles, making it one of the most compatible trainer on the market. - This trainer features a new structure which is perfect to house derailleurs with long cages that feature greater capacity on bigger 12-speed sprocket sets. This is how the Direto XR-T is compatible with 9/10/11 speed Shimano/SRAM, 9/10/11/12 speed Campagnolo, 12 speed SRAM NX and 12 speed Shimano Micro Spline cassettes. Cassette sold separately. Total Interactivity - Direto XR-T is counted among the new generation of ANT+ FE-C & Bluetooth interactive home trainers that are compatible with any kind of app, software, computer, or device (smartphones and tablets) that support iOS, Android, OSX, or Windows. - Set your course or training programs with a few clicks and start pedaling right away. Direto XR-T will automatically adjust resistance and manage your training session. - Direto XR-T can be managed via the My E-Training software & app (12-month free subscription included) or other indoor cycling services, such as: Zwift, TrainerRoad, The Sufferfest, Bkool, Kinomap and many more.
The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m