Car Racks

The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”

This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”

Yakima's 1A Raingutter Towers are the rock-solid foundation for your Yakima roof rack (for vehicles without factory roof racks). The 1A Raingutter Towers adjust to fit your vehicle's roof line and they have die-cast components that securely hold the crossbars (sold separately). Plus, they hold fast and safely to your roof with rubber pads that protect your vehicle's finish.

Yakima's 9-foot SKS Cable provides a visible theft deterrent for bikes and gear. It locks your load to the crossbar so you can park and leave your vehicle without worrying about your bikes.

If it floats and fits on crossbars, these Crossbar Pads will help protect it. - Goes great with kayak stackers, heavy-duty straps, and strapthang

Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)

Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.

No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”

Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.

Sleek and strong, the BedRock HD’s low profile delivers a 300-lb. on-road capacity and Yakima's exclusive new Off-Road Rating for up to 180 lbs. all without the need to drill into the truck bed. Pair it with the HD Bar length that best fits the bed to carry bikes, skis, cargo boxes or the SkyRise Rooftop Tent all while preserving valuable cooler-carrying capacity underneath (HD Bar sold separately). This powerhouse truck rack provides strength and security, easily-accessible tie-down points, and T-slot attachment capability that makes adding gear easy. Product Details: - Easy to reach low profile height position makes it easy to rack out and reach gear - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Simple, tool-free attachment makes installation, removal and crossbar spread adjustments a breeze - Best-in-class, maximum on-road rating of 300 lbs. - Maximum off-road rating of 180 lbs. - Built to last, with engineered aluminum construction and durable powder-coat finish - Integrated tie-down points on end-caps of HD Bar make securing any load quick and simple - T-slot attachments make adding gear mounts and accessories fast and easy - Designed and tested for all common truck beds - Integrated SKS (Same Key System) locks the rack system to the truck bed - Suggested mounts and accessories: Bike Mounts, Cargo Baskets, SkyRise Tent, Wear Strips, Eye Bolts, BigCatch Fishing Kayak Saddles Product Specs: - Weight: 8.01 lbs - Dimensions: L 5.50in x W 4.25in x H 7.00in - Some assembly required, 30 minute install

Go BigStack to go big! Mount up to 4 boats on your roof, or use that room for other gear for a multi-sport adventure. HullGuard padding keeps your boats safe and universal mounts fit nearly any shape crossbar. - Folds when not in use for better aerodynamics - Tool-free installation Fits Yakima round, square, factory, and aerodynamic bars - Top-of-the-line Hullguard padding keeps your boat protected during transport - SteelCore construction uses a steel tube frame for superior strength - Integrated ramp system makes it painless to load your boat - Includes Heavy-Duty Straps and Bow/Stern Tie-Downs Integrated bottle opener - SKS Locks sold separately - Minimum crossbar spreads of 24 inches\u001D or more

When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).

Rear wheel strap for Boa bike mount. Includes one strap.

Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).

Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. Theyre also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage

Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.

Pair of EndCaps for Yakima CoreBar.

Combining modern aerodynamics with old-school muscle, the new CoreBar is the first aero bar built with roll-formed steel’s strength, utility and durability. The JetFlow design is wind-tunnel tested to reduce drag for less wind noise and better fuel economy, and the galvanized steel delivers proven load-bearing performance. - Wind tunnel tested JetFlow teardrop shape is strong, quiet and exceptionally aerodynamic - Roll-formed galvanized steel holds the load - Sleek aerodynamic design looks awesome on your car’s roof - Vinyl wrapped for durability and corrosion resistance - Includes CoreBar SL Adapter to integrate with all StreamLine System Towers - Available in 4 sizes: SM (50”),MD (60”), LG (70”) and XL (80”)

Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.

- Sold in pairs-combine them with rollers or saddles for a custom set-up - Flexible saddle shape conforms to boat hull for secure full contact cradling - Felt padded cradles protect hulls and are shaped for easy loading - Tool free install to any cross bar - Locks to base with SKS lock Cores for added security (sold separately) - Premium HeavyDuty strap and bow/stern tie down included - Capacity: 1 kayak 80lbs (when used with another pair of saddles or rollers)

- Fits all Yakima crossbars except 86-inch - Sold in sets of 4

Be the envy of all the boaters at the river with the EvenKeel's ingenious and thrifty saddle-style rooftop rack. Universal mounts fit nearly any crossbar right out of the box. And out of the box it comes with everything you need to haul your boat, including straps and bow/stern tie-downs. Sold in a set of 4.

- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - L 15.50" x W 1.00"

Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.

- Securely carries both road and mountain bikes QR and thru-axles - Includes interchangeable inserts for QR axles (9mm) and thru axles (12mm, 15x100, 15x110) - Fat Bike compatible with optional accessory (Sold separately) - No frame contact means no damage to carbon fiber and custom paint jobs - Optional SKS locking package secures mount to vehicle, bike to mount (sold separately) - 1 bike, 40lbs capacity

The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.

Yakima's FourTimer hauls 4 bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport four bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use • Easily converts into 2-bike carrier

The FrontLoader is one of Yakima's most versatile upright mount roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It easily handles wheel sizes from 20 inches, to 700c road wheels, to large 29er mountain bike tires. Even if your bike has a unique frame design, there will be no problems carrying it because the FrontLoader holds the wheels and not the frame. Plus, it won't scratch your paint!

A fresher take on the classic strap rack, the Yakima FullBack 2 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 2 TECHNICAL SPECS - Weight: 22.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”

A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”