$3.19 $3.99 20% Off
REAR SUSP PART WASHER 10X18X2.5
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"
$268.00 - $376.00
With optimized material concentrated at the brace and seal area, outstanding stiffness and steering precision, and new E-MTB configured fork options with fender mounting points, Recon Silver is an all-around performer suited for any MTB or E-MTB bike. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (15x110mm version) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Fit Tires up to 2.8" (15x110mm version without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 32mm steel upper tubes couple stiffness with a premium look
The RockShox Recon Silver: a fork with the performance that'll help you beat your riding buddies without beating up your checking account. Sturdy 32-millimeter stanchions, stiff, forged aluminum crown, and dependable Solo Air spring make Recon Silver the fork you've been looking for. Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, and the Turn Key oil damping system offers external rebound adjustment and compression lockout for on-the-trail adjustability. - PopLoc compatible - 2.4" (62mm) maximum tire width - Crown Race: 30mm - Offset: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 26" - Stanchion Diameter: 32mm
Fox Racing Shox suspension is some of the best in the world, but any suspension system only works as well as its seals are holding up! Old seals diminish performance and can introduce dirt and grit into your suspension internals that can cause damage and premature wear. Keep your shocks working good as new with genuine Fox seals direct from the factory! Fox Float recommends a service interval of every 8 hours of usage in wet/muddy conditions to every 40 hours in dry, dusty conditions for peak performance and longevity. These Fox Shox air sleeve kits are for use with and are compatible with all the Fox Float (air sprung) rear shocks (RP23, RP3, RP2, R, RL, CTD, etc). Included in the kit are a variety of seals and stancion bushings to fit different models of shocks, as well as a "pillow pack" of Float Fluid for use inside the shock for lubrication and damping. Disassembly and service of your Fox Racing Shox rear suspension is recommended to be completed by a Certified Fox Racing Shox Service Center. Kit (Fox# 803-00-142) Includes: Float Fluid pouch Two quad rings Dust wiper Two o-rings Four back up rings Travel indicator o-ring
*This product is compatible with Surron electric dirt bikes* The World Cup proven DHX2 is full of features, delivering ultimate performance and control when the trail gets steep. A Ti-Nitride coating provides a smooth and ultra-durable finish, while the Advanced RVS damping system improves damping, control, and consistency with even more tunability. High- and low-speed compression and high- and low-speed rebound adjustment Advanced Rod Valve System (RVS) damping provides more tunability High oil flow improves damping control and consistency X2 2-position Open/Firm lever retains high and low-speed compression adjustment Coil spring sold separately
$849.95 $1,039.00 18% Off
- Fox Factory 32 Step-Cast MTB Fork, - Float EVOL air spring - FIT4 2-position damper - Dual remote - 44mm offset - Kashima Coat *Used
Replacement parts for Fox suspension forks.
The No.9 CX Flat Mount fork is a light-weight, forward-compatible front-end upgrade, ideal for cyclocross, gravel, or commuting. Featuring the flat mount disc brake standard, easy fender mounts and 12mm thru-axle dropouts to create a refined, clean design that trims considerable weight over previous versions. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 42mm max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru-axle and Whisky Parts Co. compression plug
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors. - 100 x 12mm thru-axle - 1-1/8 – 1.5" tapered steerer - 45mm offset
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
The No.7 Road fork is a thoroughly modern design, compatible with road bikes that utilize tapered steerer tubes. Features include 9mm x 100mm QR dropouts and brake mount for short-reach caliper rim brakes, to easily accommodate standard road wheels. The fork offers low weight, precise handling and tire clearance for up to 700 x 28c tires. - 9mm x 100mm spacing - For use with short reach caliper rim brakes - 700 x 28c max recommended tire size - ASTM Condition 1 - For use on paved surfaces - Includes Whisky Parts Co. compression plug - Axle to Crown Length: 367 mm - Brake Mount (Fork): Short Reach Caliper (39mm - 49mm) - Color: Black - Crown Race: 30 - Defined Color: Black - Front Axle: 9mm x 100mm - Material: Carbon - Offset: 43 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Straight - Steerer Tube Length (mm): 300 mm - Weight: 370 g - Wheel Size: 700c , 650b - Maximum Tire Clearance (Fork): 30c
The Whisky No.9 CX Flat Mount fork is a lightweight, forward-compatible front-end upgrade, ideal for cyclocross, singletrack, gravel, or commuting. Redesigned, thoroughly tested, and dialed in for rough, off-road riding, it features the flat-mount disc brake standard, easy fender mounts, 12mm thru-axle dropouts, and internal brake routing for a refined, clean design. The fork provides big tire clearance, precise handling and tracking capabilities, and a comfortable ride quality that Whisky forks are known for. - 12mm thru-axle, 100mm spacing - Designed for flat-mount disc brakes - Fender eyelets on outside of fork leg for easy mounting - 700c x 42mm or 650B x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24-inches - Includes thru-axle and Whisky Parts Co. compression plug
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup. - 12mm thru-axle, 100mm spacing - 700c x 42mm or 650b x 50mm max recommended tire size - ASTM Condition 3 – For rough off-road riding and jumps less than 24 - Includes thru-axle and Whisky Parts Co. compression plug - Brake Mount: Flat Mount 140 - Material: Carbon - Weight: 526g - Steerer Type: Tapered - Offset/Rake: 45 - Steerer Tube Length: 350mm - Axle to Crown Length: 395mm - S.H.I.S. Crown Race Diameter: 40 - S.H.I.S. Stem Clamp Diameter: 28.6 - Fork Minimum Rotor Size: 140 - Fork Maximum Rotor Size: 160
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
The Whisky No.9 MCX “monster cross” fork brings extra-wide tires to your drop-bar bike. How wide? The MCX accommodates tires up to 700c x 51mm or 650b x 61mm (that’s 2.4-inches). A relatively short 415mm axle-to-crown minimizes the geometry effects of a larger fork, and a 51mm offset improves toe clearance with large tires or fenders. The design draws from our CX forks, with lightweight carbon construction, a 12mm thru axle, and flat-mount brakes. Three-Pack mounts, dynamo cable routing, and fender mounts (700c x 45mm tire clearance with fender) add versatility for bikepackers and gravel riders. - 12 x 100mm thru-axle - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700c x 51mm or 650b x 61 mm max tire size - ASTM Condition 2 - For off-road riding and jumps less than 12-inches - Includes thru axle and Whisky Parts Co. compression plug
For carving XC courses, going the distance on gravel roads, or roaming along bikepacking routes, the Whisky No.9 MTN Boost Fork brings a new dimension to your mountain bike. Lighter and stiffer than a suspension fork, it’s long enough to replace forks with 120mm to 130mm of travel. The boost 110mm spacing means your current wheels will likely bolt right in, and clearance for up to a 29 x 3.0" or 27.5 x 3.0" tire lets you alter your setup for wherever you’re riding. The Three-Pack mounts handily hold extra water, camping gear, tools, tubes, and more. - 15mm thru-axle with 110mm Boost spacing - Post-style brake mount - 1.5" tapered carbon steerer - Two sets of Three-Pack mounts - ASTM Condition 3 - For rough off-road riding and jumps less than 24"
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
The Whisky No.9 RD thru-axle fork is designed from the ground up to offer a modern road fork experience. Big tire clearance, flat mount brake capability, and internal cable routing all add up to a clean look and capable performance. Featuring sleek hidden fender mounts, this fork carries through with Whisky’s promise of refined, versatile performance. - 1-1/4-inch Tapered steerer tube - 12mm thru-axle, 100mm spacing - Designed for flat mount disc brakes - Hidden, removable fender mounts - 700 x 30c max recommended tire size - Includes thru axle and Whisky Parts Co. compression plug
$150.99 - $175.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame. - Super short 24mm offset street fork - Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards - Incredibly strong design - 7075-T6 alloy top bolt, M24 thread - Tapered, triple butted fork blades - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing
Built to go fast and high, the Patrol fork uses 4130 "M2" chromoly tubing and features CNC machined micro dropouts that match perfectly with the dropouts on the Patrol frame. If you're looking for a strong, dependable fork with classic styling, look no further. - Light, tapered legs - 7075-T6 alloy top bolt, M24 thread - Integrated crown race designed to work with integrated headsets with a 45deg bearing - Please Note: WTP does not recommend the use of pegs on the Patrol fork
The Bridge Club fork is designed around the 27.5 wheel size with tire clearance up to 2.8, but is also capable of running 700c wheel setups with max tire clearance of 47c. It has 51mm I.S. disc caliper mounts and brake line guides as well. It only has the barnacles that matter most to the discerning bike tourist. The fork features upper and lower barrel bosses, one three pack mount on each leg, mid-blade eyelets, and rack mounts on the fork ends. - Axle-to-crown: 420mm - Offset: 43 - Steerer: 340mm - Tire Clearance: 71mm (2.8") - Weight: 1190g (2.62 lbs)
Our lugged and brazed Cross-Check fork has room for 700c x 45mm tires and fenders. It’s made from 4130 CroMoly steel and features fender eyelets at the dropouts, cantilever brake pivots, and now has through-leg mid-blade eyelets for mounting a rack. The eyelets are threaded 5 x 1mm and located 165mm up from the axle. Finish is powdercoat. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm - Tire Clearance: 700c x 45mm - Weight: 2.3 lb (1.0kg) uncut
The Dinner Fork is non-suspension corrected and accommodates 26", 27.5", and 29" wheel sizes. If you want to run fenders alongside an 8 or 24-Pack style rack, this fork can do that. Hell, it relishes it. To give you even more options for carrying miscellaneous items, we put a set of 3-pack mounts on each fork blade, too. Run it on your current Surly for a thought-provoking new experience, or throw it on a different rig to unlock some off-road capabilities. A truly versatile piece of cutlery, the Dinner Fork features 100% Surly Chromoly steel construction, 51mm IS disc brake mounts, and clearance for tires up to 26 x 3.0", 27.5 x 2.8", or 29 x 2.2". Specifications: - Axle-to-crown: 420mm - Offset: 50mm - Steerer: 350mm, 1-1/8" straight - Tire Clearance: 26 x 3.0" (without fenders); 27.5 x 2.8" (with or without fenders); or 29 x 2.2" (without fenders) - Weight: 2.75 lb.
Like its QR cousin, the Disc Trucker Thru-Axle Fork is designed to mount racks and fenders and haul your worldly possessions. It's also got modern touches like dynamo routing, compatibility with flat-mount disc brakes, and three-pack mounts on both fork blades to satisfy your deepest cargo desires. Captured 12mm thru-axles make tool-free removal and installation possible. Offered in 26" and 700c wheel sizes, the Thru-Axle fork clears 26 x 2.1" or 700c x 47mm tires. With a 1-1/8" steerer, it's powder-coated and constructed using the same Chromoly steel as all our other frames and forks. Why? Because we swore a blood oath to steel and we intend to keep it. Note: The Disc Trucker TA Fork is designed to pair best with second-generation Disc Trucker models—those first released in 2020. Defy this guidance at your own peril. 26 Inch - Axle-to-crown: 376mm - Offset: 45mm - Steerer: 42–54cm frames = 300mm, 1-1/8" straight - 56–62cm frames = 400mm, 1-1/8" straight - Tire Clearance: 26 x 2.1" (with or without fenders) 700c - Axle-to-crown: 390mm - Offset: 45mm - Steerer: 56–64cm frames = 350mm, 1-1/8" straight - Tire Clearance: 700c x 47mm (with or without fenders)
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
The Ice Cream Truck fork is made from 4130 CroMoly steel and is designed for Surly's Ice Cream Truck frame. It's ready for trail use and features butted and tapered blades with thru-axle dropouts spaced at 150mm. It has barrel bosses at the dropouts and crown, mid-blade thru-blade eyelets and triple bottle bosses on both fork legs. That's a lot of bosses. 51mm I.S. mounts use front disc spacing. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm, 1-1/8-inch straight - Tire Clearance: 26 x 5.25-inch
Karate Monkey Rigid Fork Employed on our Krampus and Karate Monkey frames, this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0" tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or original Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Karate Monkey fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8" threadless. It has line guides for a disc brake line as well as mid-blade thru-blade eyelets and Three-Pack bosses on both fork legs. Features: - Tire Clearance: 29 x 3.0" - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - 110mm hub spacing - 15mm thru-axle dropouts - Tapered and butted straight blade - 51mm I.S. disc mount - Weight: 1180g uncut - 100% Surly Chromoly Steel
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Page 1 of 7 Next page